Administrator Guide

Switch Management Commands 2053
User Guidelines
Debug commands should be used with caution. Switch behavior may be
adversely affected by the additional processing load incurred by enabling
debug output.
Example
The following examples enables display of CFM events on the console.
console#debug cfm event
debug clear
Use the debug clear command to disable all debug traces.
Syntax
debug clear
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode.
User Guidelines
There are no user guidelines for this command.
Example
console#debug clear
debug console
Use the debug console to enable the display of “debug” trace output on the
login session in which it is executed. Debug console display must be enabled
in order to view any trace output. The output of debug trace commands
appears on all login sessions for which debug console has been enabled. The
configuration of this command remains in effect for the life of the login
session. The effect of this command is not persistent across resets.
2CSNXXX_SWUM204.book Page 2053 Monday, January 25, 2016 1:25 PM