Administrator Guide

Switch Management Commands 2054
Syntax
debug console
Default Configuration
Display of debug traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug console
debug crashlog
Use this command to display the crash log contents on the console.
Syntax
debug crashlog { crashlog-index | proc | kernel crashlog-index | data
crashlog-index [ comp-id ] [ item-number ] [ add-param ] [ add-param ] |
deleteall } [ unit
unit-index ]
• crashlog-index —Indicates which crash log to display. The range is 0-4. 0
indicates the most recent log and 4 specifies the oldest log.
•
proc —Display the process crash log.
•
kernel —Display the kernel crash data.
•
data —Display the crash summary data.
•
deleteall —Delete all existing crash logs.
•
unit-index —An optional specifier identifying the stack unit number from
which to obtain the crash log.
•
comp-id —
2CSNXXX_SWUM204.book Page 2054 Monday, January 25, 2016 1:25 PM