Administrator Guide

Switch Management Commands 2055
• item-number —
•
add-param —
Default Configuration
By default, this command displays all crash logs for the specified index.
Command Modes
Privileged Exec mode, User Config mode, all show modes
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example displays the most recent crash log for the stack master.
console#debug crashlog 0
Displaying Crash Dump 0
For kernel Crash Dump - osapiDebugCrashDumpDisplay(x,1)
***************************************************
* Start Stack Information *
***************************************************
pid: 32195
TID: -1215952016
Task Name: emWeb
si_signo: 11
si_errno: 0
si_code: 1
si_addr: 0x0
Date/Time: 8/13/2011 16:37:31
SW ver: 0.0.0.0
------------ CALL STACK INFO ------------
Stack pointer before signal: 0x00000000
Offending instruction at address 0x00000000
tried to access address 0x00000000
CPU's exception-cause code: 0x00000000
2CSNXXX_SWUM204.book Page 2055 Monday, January 25, 2016 1:25 PM