Administrator Guide

Switch Management Commands 2057
$0839b295$ ewaNetTelnetDataInternal + 0x959
$0839a928$ ewaNetTelnetData + 0x30
$083a7b73$ ewsTelnetParse + 0x2b9
$08387592$ ewsParse + 0x162a
$08372fbc$ ewsRun + 0x149
$08395caf$ ewmain + 0x17c
$083996de$ emweb_main + 0x1a3
$083d6f71$ osapi_task_wrapper + 0xa6
$00134e99$ ?????
$0021873e$ ?????
-----------------------------------------
debug dhcp packet
Use the debug dhcp packet command in Privileged Exec mode to display
debug information about DHCPv4 client activities and to trace DHCPv4
packets to and from the local DHCPv4 client. To disable debugging, use the
no form of this command.
Syntax
debug dhcp packet [transmit | receive]
no debug dhcp packet [transmit | receive]
Default Configuration
By default, DHCP client packet tracing is disabled.
Command Mode
Privileged Exec
User Guidelines
The DHCP client has an internal packet tracing capability. This command
turns the packet tracing on.
Debug commands should be used with caution. Switch behavior may be
adversely affected by the additional processing load incurred by enabling
debug output.
2CSNXXX_SWUM204.book Page 2057 Monday, January 25, 2016 1:25 PM