Administrator Guide

Switch Management Commands 2064
If the vrf-name is specified, information pertaining to that VRF is displayed.
Command History
Introduced in version 6.2.0.1 firmware.
Updated in version 6.3.0.1 firmware.
Example
console#debug ip bgp 10.27.21.142 events
debug ip dvmrp
Use the debug ip dvmrp to trace DVMRP packet reception and transmission.
The receive option traces only received DVMRP packets and the transmit
option traces only transmitted DVMRP packets. When neither keyword is
used in the command, all DVMRP packet traces are dumped. Vital
information such as source address, destination address, control packet type,
packet length, and the interface on which the packet is received or
transmitted is displayed on the console.
Syntax
debug ip dvmrp packet [ receive | transmit ]
no debug ip dvmrp packet [ receive | transmit ]
Default Configuration
Display of DVMRP traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug ip dvmrp packet
2CSNXXX_SWUM204.book Page 2064 Monday, January 25, 2016 1:25 PM