Administrator Guide

Switch Management Commands 2073
is used in the command, then all ISDP packet traces are dumped. Vital
information such as source address, destination address, control packet type,
packet length, and the interface on which the packet is received or
transmitted is displayed on the console. Use the “no” form of this command
to disable ISDP tracing.
Syntax
debug isdp packet [ receive | transmit ]
no debug isdp packet [ receive | transmit ]
Default Configuration
Display of ISDP traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug isdp packet
debug lacp
Use the debug lacp command to enable tracing of LACP packets received and
transmitted by the switch. Use the “no” form of this command to disable
tracing of LACP packets.
Syntax
debug lacp packet
no debug lacp packet
Default Configuration
Display of LACP traces is disabled by default.
2CSNXXX_SWUM204.book Page 2073 Monday, January 25, 2016 1:25 PM