Administrator Guide

Switch Management Commands 2076
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug ospf packet
debug ospfv3
Use the debug ospfv3 command to enable tracing of OSPFv3 packets
received and transmitted by the switch. Use the “no” form of this command
to disable tracing of OSPFv3 packets.
Syntax
debug ospfv3 packet
no debug ospfv3 packet
Default Configuration
Display of OSPFv3 traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug ospfv3 packet
debug ping
Use the debug ping command to enable tracing of ICMP echo requests and
responses. This command traces pings on the network port and on the
routing interfaces. Use the no form of this command to disable tracing of
ICMP echo requests and responses.
2CSNXXX_SWUM204.book Page 2076 Monday, January 25, 2016 1:25 PM