Administrator Guide

Switch Management Commands 2082
Syntax
debug vrrp all
no debug vrrp all
Default Configuration
The display of VRRP traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
exception core-file
Use the exception core-file command to configure the core dump file name.
Use the no form of the command the reset the core file name to the default.
Syntax
exception core-file file-name [hostname [time-stamp] | time-stamp
[
hostname ]]
no exception core-file
• file-name — The file name. The maximum length is 15 characters.
Embedded blanks may not be allowed by the host file system (for example,
TFTP server) and are not recommended.
•
hostname — Includes the switch host name in the core file name. If not
configured, uses the switch MAC address in the core file name.
•
time-stamp —Includes the switch TOD in the core file name.
Default Configuration
By default, the core file name has no prefix and no host name and uses the
time stamp of the switch in the core file name.
2CSNXXX_SWUM204.book Page 2082 Monday, January 25, 2016 1:25 PM