Administrator Guide

Dell Networking CLI 207
sFlow
exception protocol Enables full core dumps. GC
exception switch-chip-
register
Enables the dumping of the switch chip
registers in case of an exception.
GC
ip http rest-api port Configures the RESTful API to listen on
the configured port.
GC
ip http rest-api secure-port Configures the RESTful API to listen on
the configured port.
GC
ip http timeout-policy Configures the timeout policy for closing
HTTP and HTTPS sessions to the local
HTTP server.
GC
show debugging Displays packet tracing configurations. PE
show ip http Displays the HTTP server status and
configuration.
PE,
GC
show supported mibs Displays the implemented SNMP MIBs. PE,
GC
snapshot bgp Dumps a set of BGP debug information to
capture the current state of BGP.
S
write core Generates a core file on demand and either,
reboots the switch or tests the core file
configuration.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
sflow destination Configures sFlow collector parameters (owner
string, receiver timeout, ip address, and port).
GC
sflow polling Enables a new sflow poller instance for the data
source if rcvr_idx is valid.
GC
sflow polling (Interface
Mode)
Enable a new sflow poller instance for this data
source if rcvr_idx is valid.
IC
sflow sampling Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
GC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 207 Monday, January 25, 2016 1:25 PM