Administrator Guide

Switch Management Commands 2088
Default Configuration
By default, switch register dumps are disabled.
Command Modes
Global Configuration mode
User Guidelines
This option should only be used under the direction of Dell support
personnel.
Switch registers are captured to the local file system.
ip http rest-api port
Use the ip http rest-api port command to configure the RESTful API to
listen on the configured port. Use the no form of the command to configure
the RESTful API to listen on the default port.
Syntax
ip http rest-api port port-number
no ip http rest-api port
• port-number —The TCP port on which the REST server listens. The range
is 1025-65535.
Default Configuration
The default port number is 8080.
Command Mode
Global Configuration
User Guidelines
The RESTful API is enabled when the HTTP server is enabled. Disabling the
HTTP server disables the RESTful API.
2CSNXXX_SWUM204.book Page 2088 Monday, January 25, 2016 1:25 PM