Administrator Guide

Switch Management Commands 2110
Example
console(config)#show sflow 1 destination
Receiver Index................................. 1
Owner String................................... asd
Time out....................................... No Timeout
IP Address:.................................... 1.2.3.4
Address Type................................... 1
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
show sflow polling
Use the show sflow polling command to display the sFlow polling instances
created on the switch.
Syntax
show sflow rcvr-index polling [{gigabitethernet | tengigabitethernet |
fortygigabitethernet}
interface-list ]
• rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interface-list — The list of interfaces to poll, in unit/slot/port format.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
The following fields are displayed:
Time Out The time (in seconds) remaining before the receiver is released
and stops sending samples to sFlow receiver.
Max Datagram
Size
The maximum number of bytes that can be sent in a single sFlow
datagram.
Port The destination Layer4 UDP port for sFlow datagrams.
2CSNXXX_SWUM204.book Page 2110 Monday, January 25, 2016 1:25 PM