Administrator Guide

Switch Management Commands 2114
show snmp
Use the show snmp command in Privileged Exec mode to display the SNMP
communications status.
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP communications status.
Console # show snmp
Community-StringCommunity-AccessView nameIP address
----------------------------------------------------
publicread onlyuser-viewAll
privateread writeDefault172.16.1.1
privatesuDefaultSuper172.17.1.1
Community-String Group nameIP address
-----------------------------------
publicuser-groupAll
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP Filter TO Retries
Port name Sec
-------------- ------ --------- ------- ---- ------ --- -----
192.122.173.42 Trap public 2 162 filt1 15 3
192.122.173.42 Inform public 2 162 filt2 15 3
2CSNXXX_SWUM204.book Page 2114 Monday, January 25, 2016 1:25 PM