Administrator Guide

Switch Management Commands 2127
User Guidelines
Use the command with no parameters to globally enable sending of traps. Use
the no form of the command with no parameters to globally disable sending
of traps without changing the configured traps.
Refer to the description of the global configuration mode buffer command
for setting the rising and falling thresholds for the sending of the message
buffer trap.
Refer to the description of the Global Configuration mode process cpu
command for setting the rising and falling thresholds for the sending of the
CPU occupancy trap.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following example displays the options for the snmp-server enable traps
command.
console(config)#snmp-server enable traps ?
<cr> Press enter to execute the command.
acl Enable/Disable traps for access control lists.
all Enable/Disable all Traps.
auto-copy-sw Enable/Disable auto copy of code if there is a
version mismatch.
bgp Enable BGP traps.
buffers Configure Mbuf threshold traps.
captive-portal Enable/Disable SNMP traps for CP system events.
cpu Configure CPU threshold traps.
dot1q Enable/Disable switch level Dot1q trap flag.
dvmrp Enable/Disable traps for distance vector multicast
routing protocol.
link Enable/Disable switch level Link Up/Down trap flag.
multiple-users Configure multiple users login traps.
ospf Enable/Disable OSPF Traps.
ospfv3 Enable/Disable OSPFv3 Traps.
pim Enable/Disable traps for protocol-independent
multicast.
port-security Enable/Disable switch level Maclock Violation trap
flag.
snmp Enable SNMP traps.
2CSNXXX_SWUM204.book Page 2127 Monday, January 25, 2016 1:25 PM