Administrator Guide

Dell Networking CLI 211
System Management
logging protocol Logs messages in RFC5424 of RFC 3164
format.
GC
logging snmp Enables SNMP Set command logging. GC
logging source-interface Selects the interface from which to use the IP
address in the source IP address field of
transmitted SYSLOG packets.
GC
logging web-session Enables web session logging. GC
port Specifies the port number on which the
SYSLOG server listens for messages.
L
show logging Displays the state of logging and the messages
stored in the internal buffer.
PE
show logging file Displays the state of logging and the messages
stored in the logging file.
PE
show syslog-servers Displays the SYSLOG server settings. PE
terminal monitor Enables the display of logging messages over a
telnet of SSH session.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
asset-tag Specifies the switch asset-tag. GC
banner exec Sets the message that is displayed after a
successful login.
GC
banner login Sets the message that is displayed just before
the login prompt.
GC
banner motd Specifies message-of-the-day banner. GC
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
buffers Configures the rising and falling thresholds for
the issuance of the message buffer SNMP trap
and notification via a SYSLOG message.
GC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 211 Monday, January 25, 2016 1:25 PM