Administrator Guide

Switch Management Commands 2135
• groupname — Specifies the name of the group to which the user belongs.
(Range: 1-40 characters.)
•
engineid-string — Specifies the engine ID of the remote SNMP entity to
which the user belongs. The engine ID is a concatenated hexadecimal
string. Each byte in the hexadecimal character string is two hexadecimal
digits. The remote engine id designates the remote management station,
and should be defined to enable the device to receive acknowledgements
to "informs." (Range: 5-32 characters.)
•
auth-md5 — HMAC-MD5-96 authentication mode.
•
auth-sha — HMAC-SHA-96 authentication mode.
•
password — A password. (Range: 1 to 32 characters.)
•
auth-md5-key — HMAC-MD5-96 authentication message digest key.
Enter a pre-generated MD5 key.
•auth-
sha-key — HMAC-SHA-96 authentication message digest key. Enter
a pre-generated SHA key.
•
md5-key — Character string — length 32 hex characters.
•
sha-key — Character string — length 40 hex characters.
•
priv-des — CBC-DES Symmetric Encryption privacy mode. Enter a
shared password to generate the key.
•
priv-des-key — CBC-DES Symmetric Encryption privacy mode. The
administrator should enter a pre-generated DES encryption key.
•
des-key — The pregenerated DES encryption key. The length is
determined by the authentication method selected
. Enter 32 hex
characters if MD5 Authentication is selected, 40 hex characters if SHA
Authentication is selected.
•
priv-3des — The CBC 3DES Symmetric Encryption privacy level. Enter a
shared password to generate the key.
•
priv-3des-key — The CBC-3DES Symmetric Encryption privacy level. The
administrator should enter a pre-generated 3DES key.
•
priv-aes128 — CBC-AES128 Symmetric Encryption privacy mode.
•
priv-aes128-key — A pre-generated AES128 encryption key - 32 hex
characters in length.
2CSNXXX_SWUM204.book Page 2135 Monday, January 25, 2016 1:25 PM