Administrator Guide

Switch Management Commands 2136
• aes-key — Advanced Encryption Standard. Enter a pre-generated AES key
of the appropriate length (128 or 256 bits). An AES 128 bit key is 32
hexadecimal characters in length.
Default Configuration
No user entry exists.
Command Mode
Global Configuration mode
User Guidelines
If the SNMP local engine ID is changed, configured users will no longer be
able to connect and will need to be re-configured (deleted from the
confguration and added back).
Use of MD5 authentication in conjunction with AES privacy is discouraged
as it results in a weak cypher. Utilize SHA authentication when using AES
privacy.
The SNMP group must exist or an error is displayed and the user is not
configured. The user name can consist of any printable character and may
contain embedded blanks if enclosed in quotes.
Example
The following example configures an SNMPv3 user "John" in group "user-
group".
console(config)# snmp-server user John user-group
snmp-server view
Use the snmp-server view command in Global Configuration mode to create
or update a Simple Network Management Protocol (SNMP) server view entry.
To delete a specified SNMP server view entry, use the no form of this
command.
Syntax
snmp-server view view-name oid-tree { included | excluded }
no snmp-server view
view-name [ oid-tree ]
2CSNXXX_SWUM204.book Page 2136 Monday, January 25, 2016 1:25 PM