Administrator Guide

Dell Networking CLI 213
set description Associates a text description with a switch in
the stack.
SG
slot Configures a slot in the system. GC
show banner Displays banner information. PE
show buffers
Displays the system allocated buffers.
UE or PE
show checkpoint
statistics
Displays the statistics for the checkpointing
process.
PE
show cut-through mode Show the cut-through mode on the switch. PE
show hardware profile Displays the hardware profile information
for the 40G ports.
PE
show idprom interface Displays the optics EEPRM contents in a user-
readable format.
UE or PE
show interfaces Displays the traffic statistics for one or
multiple interfaces.
UE
show interfaces
advanced firmware
Displays the firmware revision of the PHY for a
port.
PE
show interfaces Displays the static and dynamic parameters for
the optics.
UE or PE
show interfaces
utilization
Displays the interface utilization. PE
show memory cpu Checks the total and available RAM space on
the switch.
PE
show nsf Shows non-stop forwarding status. PE
show power-usage-
history
Shows the history of unit power consumption
for the unit specified in the command and total
stack power consumption.
PE
show process app-list Displays the system applications. PE or GC
show process app-
resource-list
Lists the configured and in-use resources
for each application known to the Process
Manager.
PE or GC
show process cpu Checks the CPU utilization for each process
currently running on the switch.
PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 213 Monday, January 25, 2016 1:25 PM