Administrator Guide

Switch Management Commands 2155
<190> JAN 10 18:59:17 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 369 %% [CLI:----:EIA-232] Access level of user admin
has been set to 15
If enabled, the CLI command logger subsystem begins to log commands
immediately after the user is authenticated. After authentication, the CLI
generates an explicit message and invokes the command logger. The format of
the message at login is:
<189> JAN 10 18:58:56 10.27.21.22-2 CMDLOGGER[209809328]:
cmd_logger_api.c(83) 361 %% CLI:10.27.21.22:admin:User admin logged in
<190> JAN 10 18:58:56 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 362 %% [CLI:admin:10.27.21.22] User has successfully
logged in
The CLI command log subsystem also logs all user log out instances. The
format of the log message is:
<190> JAN 10 19:01:04 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 382 %% [CLI:admin:10.27.21.22] User has logged out
Commands in this Section
This section explains the following commands:
clear logging
Use the clear logging command in Privileged Exec mode to clear messages
from the internal logging buffer.
clear logging logging monitor
clear logging file logging on
description (Logging) logging protocol
level logging snmp
logging cli-command logging source-interface
logging logging web-session
logging audit port
logging buffered show logging
logging console show logging file
logging facility show syslog-servers
logging file terminal monitor
2CSNXXX_SWUM204.book Page 2155 Monday, January 25, 2016 1:25 PM