Administrator Guide

Switch Management Commands 2164
logging console
Use the logging console command in Global Configuration mode to limit
messages logged to the console based on severity. To disable logging to the
console terminal, use the no form of this command.
Syntax
logging console [ severity–level ]
no logging console
• severity–level —(Optional) The number or name of the desired severity
level. Range:
– [0 | emergencies]
– [1 | alerts]
– [2 | critical]
– [3 | errors]
– [4 | warnings]
– [5 | notifications]
– [6 | informational]
– [7 | debugging]
Default Configuration
The default value for level is warnings.
Command Mode
Global Configuration mode
User Guidelines
Messages at the selected level and above (numerically lower) are displayed on
the console. Debug level messages are intended for use by support personnel.
The output is voluminous, cryptic, and because of the large number of
messages generated, can adversely affect switch operations. Only set the
logging level to debug under the direction of support personnel.
2CSNXXX_SWUM204.book Page 2164 Monday, January 25, 2016 1:25 PM