Administrator Guide

Switch Management Commands 2167
logging monitor
Use the logging monitor command in Global Configuration mode to enable
logging messages to telnet and SSH sessions with the default severity level.
Use the no logging monitor command to disable logging messages.
Syntax
logging monitor severity
no logging monitor
• severity —(Optional) The number or name of the desired severity level.
Range:
– [0 | emergencies]
– [1 | alerts]
– [2 | critical]
– [3 | errors]
– [4 | warnings]
– [5 | notifications]
– [6 | informational]
– [7 | debugging]
Default Configuration
The default severity value is warnings. By default, logging messages are not
displayed on SSH or telnet sessions. Logging messages are displayed by
default on console sessions (serial and out-of-band ports).
Command Mode
Global Configuration mode
User Guidelines
Messages logged to the console are filtered based on severity. Selecting a
severity level will log that severity and higher (numerically lower) level
messages.
2CSNXXX_SWUM204.book Page 2167 Monday, January 25, 2016 1:25 PM