Administrator Guide

Dell Networking CLI 215
Telnet Server
Time Ranges
standby Configures the standby in the stack. SG
switch renumber Changes the identifier for a switch in the stack. GC
telnet Logs into a host that supports Telnet. PE
traceroute Discovers the IP routes that packets actually
take when travelling to their destinations.
PE
traceroute ipv6 Discovers the IP routes that packets
actually take when traveling to their
destinations.
PE
update bootcode Updates the bootcode on one or more
switches.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
ip telnet server disable Enables/disables the Telnet service on the
switch.
GC
ip telnet port Configures the Telnet TCP port number on the
switch.
GC
show ip telnet Displays the status of the Telnet server and the
Telnet TCP port number.
PE
Command Description Mode
a
show boot Creates a time range identified by name,
consisting of one absolute time entry and/or one
or more periodic time entries.
GC
absolute Adds an absolute time entry to a time range. TRC
periodic Adds a periodic time entry to a time range. TRC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 215 Monday, January 25, 2016 1:25 PM