Administrator Guide

Switch Management Commands 2175
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the state of logging messages sorted in the
logging file.
console#show logging file
Persistent Logging : enabled
Persistent Log Count : 1
<186> JAN 01 00:00:05 0.0.0.0-1 UNKN[268434928]: bootos.c(382) 3 %%
Event(0xaaaaaaaa)
show syslog-servers
Use the show syslog-servers command in Privileged Exec mode to display the
SYSLOG servers settings.
Syntax
show syslog-servers
Default Configuration
When enabling x509 authentication, a default (non-indexed) certificate pair
is used if present and no index was selected for the server.
Anonymous authentication does not use a certificate.
The default SYSLOG server port number is 514. When DTLS is configured
(logging protocol 1), the default port number is 6514.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
2CSNXXX_SWUM204.book Page 2175 Monday, January 25, 2016 1:25 PM