Administrator Guide

Switch Management Commands 2176
User Guidelines
This command has no user guidelines.
Example
The following example displays the SYSLOG server settings.
console#show syslog-servers
IP address Port Severity Description
----------------------------------------------
192.180.2.275 14 Info 7
192.180.2.285 14 Warning 7
Transport Type Authentication Certificate Index
-------------- ----------------- -------------------
UDP
TLS X509 5
TLS Anonymous
terminal monitor
Use the terminal monitor command in Privileged Exec mode to enable the
display of system messages on the terminal for telnet and SSH sessions.
Syntax
terminal monitor
no terminal monitor
Default Configuration
The default setting is that system messages are not displayed on telnet or
SSH sessions. System messages are always displayed on console sessions
(serial or out-of-band port connections).
Command Mode
Privileged Exec mode
User Guidelines
Use the terminal monitor command in Privileged Exec mode enables system
messages to be displayed in a Telnet or SSH session.
2CSNXXX_SWUM204.book Page 2176 Monday, January 25, 2016 1:25 PM