Administrator Guide

Switch Management Commands 2183

User Guidelines

Various terminal emulators exhibit different behaviors with regards to the

MOTD and the acknowledge prompt, for example, TeraTerm and putty.

There are also different behaviors based upon the protocol used (SSH versus

telnet). See below for some examples where the MOTD prompt occurs either

before or after the acknowledge prompt. The banner motd in this example is

If you need to utilize this device or otherwise make

changes to the configuration, you may contact Kevin at x911.

Please be advised this unit is under test by Kevin.

" and the

banner login is "

Welcome to the N3024 in the Bottom Chassis -

192.168.12.190. This unit is located in A2 and is currently

under test.

SSH (putty):

dellradius

If you need to utilize this device or otherwise make changes to the

configuration, you may contact Kevin at x911.

Please, be advised this unit is under test by Kevin.

dellradius@192.168.12.84's password:

Press 'y' to continue (within 30 seconds) (y/n)

Welcome to the N3024 in the Bottom Chassis - 192.168.12.190. This unit is

located in A2 and is currently under test.

N3024-C1>

SSH (Linux Terminal):

[root@kevin ~]# ssh 192.168.12.84 -l dellradius