Administrator Guide

Switch Management Commands 2215
Command Modes
User EXEC, Privileged EXEC modes.
User Guidelines
This command has no user guidelines.
Example
The following example shows the optic parameters in user readable format.
console#show idprom interface tengigabitethernet 1/0/9
Type.............................. SFP+
Media............................. 10GBASE-LRM
Serial Number..................... ANF0L5J
Dell Qualified.................... Yes
The following example shows the optic parameters, but not the IDPROM
content as the entered activation code in incorrect.
console#show idprom interface tengigabitethernet 1/0/9 debug abc
Type.............................. SFP+
Media............................. 10GBASE-LRM
Serial Number..................... ANF0L5J
Dell Qualified.................... Yes
show interfaces
Use the show interfaces command to display the traffic statistics for one or
multiple interfaces. If no parameter is given, all interfaces are shown.
Syntax
show interfaces interface-id
• interface-id —The ID for any valid physical interface (that is, a 1G, 10G, or
40G interface in standard interface format or a port-channel identifier).
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 2215 Monday, January 25, 2016 1:25 PM