Administrator Guide

Switch Management Commands 2228
1 switchdrvr 280 Unlimited Unlimited 256MB 280MB
2 syncdb-test 0 10MB 20% 0MB 0MB
show process cpu
Use the show process cpu command to check the CPU utilization for each
process currently running on the switch.
Syntax
show process cpu
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
User Guidelines
No specific guidelines.
Example
console#show process cpu
Memory Utilization Report
status bytes
------ ----------
free 64022608
alloc 151568112
CPU Utilization:
PID Name 5 Sec 1 Min 5 Min
---------------------------------------------------------
328bb20 tTffsPTask 0.00% 0.00% 0.02%
3291820 tNetTask 0.00% 0.00% 0.01%
3295410 tXbdService 0.00% 0.00% 0.03%
347dcd0 ipnetd 0.00% 0.00% 0.01%
348a440 osapiTimer 1.20% 1.43% 1.21%
358ee70 bcmL2X.0 0.40% 0.30% 0.12%
359d2e0 bcmCNTR.0 0.80% 0.42% 0.50%
2CSNXXX_SWUM204.book Page 2228 Monday, January 25, 2016 1:25 PM