Administrator Guide

Switch Management Commands 2238
Use the show sdm prefer command to display the SDM template
configuration.
Syntax
show switch [ stack–member–number | stack–ports[counters | diag | stack-
path {
from-unit | all } to unit ] | stack–standby]
• unitid —The unit number.
•
stack–member–number —The stack member number.
•
stack–ports —Display summary stack-port information for all interfaces.
•
counters —Display summary data counter information for all interfaces.
•
diag —Display front panel stacking diagnostics for each port.
•
stack-path —Display the active path from one stacking unit to another.
•
From-unit —The unit from which the packets originate.
•
All —Displays all unit paths.
•
To-unit —The unit to which the packets are sent.
•
stack–standby —Display the configured or automatically selected standby
unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
User Guidelines
The show switch stack-ports stack-path command is useful in tracking the
path a packet may take when traversing stacking links. The command shows
active paths only, not those that may be taken after a stack failover or stack
reconvergence.
The following table describes the fields in the switch stack status example.
2CSNXXX_SWUM204.book Page 2238 Monday, January 25, 2016 1:25 PM