Administrator Guide

Switch Management Commands 2240
The additional fields in the all units example are as follows:
Per Unit Status Parameters are explained as follows:
Up Time This field displays the system up time.
Unit Description
Switch This field displays the unit identifier assigned to
the switch.
Management Status This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.
Standby Status This field indicates whether the switch is the
Standby Switch.
Preconfigured Model Identifier This field displays the model identifier of a
preconfigured switch ready to join the stack.
The Model Identifier is a 32-character field
assigned by Dell to identify the switch.
Plugged-In Model Identifier This field displays the model identifier of the
switch physically present in the stack. The
Model Identifier is a 32-character field assigned
by Dell to identify the switch.
Switch Status This field indicates the switch status. Possible
values for this state are: OK, Unsupported,
Code Mismatch, Cfg Mismatch, SDM
Mismatch, STM Mismatch, or NotPresent
Code Version This field indicates the detected version of code
on this switch.
Parameter Description Range Default
NSF Support Whether a unit
supports NSF
Yes or No Yes
Unit Description
2CSNXXX_SWUM204.book Page 2240 Monday, January 25, 2016 1:25 PM