Administrator Guide
Switch Management Commands 2248
---- ------------------ -----------
1 MAC 33
1 PHY 34
show tech-support
Use the show tech-support command to display system and configuration
information for use in debugging or contacting technical support. The output
of the show tech-support command combines the output of the following
commands:
• show interfaces transceiver
• show power inline
• show switch stack-port counters
• show nsf
•show slot
• show interfaces advertise
• show interfaces advanced firmware
• show lldp remote-device all
• show interfaces counters errors
• show fiber-ports optical-transceiver
•show process cpu
• show iscsi sessions
• show ethernet cfm errors (N4000 series only)
• show power inline firmware-version
•show version
• show interfaces transceiver properties
Syntax
show tech-support [ bgp | bgp-ipv6 | ospf | ospfv3 | bfd ] [file | usb]
•
bgp
— Show detailed information specific to BGP.
•
bgp-ipv6
— Show detailed information specific to BGP IPv6.
•
ospf
— Show detailed information specific to OSPF.
2CSNXXX_SWUM204.book Page 2248 Monday, January 25, 2016 1:25 PM