Administrator Guide

Switch Management Commands 2249
• ospfv3 — Show detailed information specific to OSPFv3.
•
bfd — Show detailed information specific to BFD.
•
file — Write the output to a file in the local flash instead of the console.
•
usb — Write the output to a file on the USB drive instead of the console.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
Tech support files are named tech-supportXXX.txt, where XXX is the date
and time stamp of the form YYMMDDHHMMSS. YY is the last two digits of
the year, MM is the month, DD is the day of the month, HH is the hour in
24-hour format, MM is the minute, and SS is the second.
Use the copy flash://techsupportXXX.txt <destination> form of the copy
command to copy the tech-support file from the switch.
A USB device must be plugged in to the USB port if the usb parameter is
given.
Default Value
Not applicable
Example
console#show tech-support
***************** Show Version ******************
Switch: 1
System Description................ Dell Networking N4032, 6.0.0.0, Linux
2.6.32.9
Machine Description............... Dell Networking Switch
System Model ID................... N4032
Machine Type...................... Dell Networking N4032
Serial Number..................... 0000
Manufacturer...................... 0xbc00
Operating System.................. Linux 2.6.32.9
Burned In MAC Address............. 0011.2233.4455
2CSNXXX_SWUM204.book Page 2249 Monday, January 25, 2016 1:25 PM