Administrator Guide

Switch Management Commands 2282
using this command. When in modes other than Global Configuration mode,
the do command will not appear in the list of commands shown in the help,
nor will prompting be available.
Syntax
do line
do ?
• line — Command to be executed. It should be an unambiguous command
from the Privileged Exec mode. Commands such as
configure are
forbidden. Command line completion for the line parameter is supported.
Users may only execute commands for which they have the appropriate
privileges.
Default Configuration
This command has no default configuration.
Command Mode
All except Privileged Exec and User Exec modes.
User Guidelines
As per each command.
Example #1
console>en
console#configure
console(config)#interface gi1/0/1
console(config-if-Gi1/0/1)#d?
description dhcp do
dot1x duplex
console(config-if-Gi1/0/1)#do ? ! Help from privileged Exec level
console(config)#do ?
arp Purge a dynamic or gateway ARP entry.
boot Select a boot image for use on the next reload.
captive-portal Manage captive portal clients.
clear Clear learned configuration or statistics.
configure Enter global Configuration mode.
2CSNXXX_SWUM204.book Page 2282 Monday, January 25, 2016 1:25 PM