Administrator Guide

Switch Management Commands 2288
on the server is 15, the user is given read-write permissions. Any other value is
read-only. If exec shell feature is not enabled on the server, the user is given
read-only permissions.
Commands in this Section
This section explains the following commands:
common-name
Use the common-name command in Crypto Certificate Generation or
Crypto Certificate Request mode to specify the common-name for the
switch.
Syntax
common-name common-name
• common-name —Specifies the fully qualified URL or IP address of the
switch. If left unspecified, this parameter defaults to the lowest IP address
of the switch (when the certificate is generated). (Range: 1–64)
Default Configuration
This command has no default configuration.
common-name ip http secure-server
crypto certificate generate key-generate
crypto certificate import location
crypto certificate request no crypto certificate
duration organization-unit
ip http port show crypto certificate mycertificate
ip http server show ip http server status
ip http secure-certificate show ip http server secure status
ip http secure-port state
2CSNXXX_SWUM204.book Page 2288 Monday, January 25, 2016 1:25 PM