Administrator Guide

Using the CLI 245
10 Gigabit
Ethernet
From Global
Configuration
mode, use the
interface
tengigabitethernet
command. Or, use
the abbreviation
interface te.
console (config-if-
Te
unit/slot/port #
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
40 Gigabit
Ethernet
From Global
Configuration
mode, use the
interface
fortygigabitetherne
t command. Or, use
the abbreviation
interface fo.
console (config-if-
Fo
unit/slot/port #
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Port Channel From Global
Configuration
mode, use the
interface port-
channel command.
Or, use the
abbreviation
interface po.
console (config-if-po port-
channel-number
)#
To exit to Global
Configuration
mode, use the
exit command,
or
<Ctrl>+<Z>
to Privileged
Exec mode.
VLAN From Global
Configuration
mode, use the
interface vlan
command.
console(config-if-vlan vlan-
id
)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
2CSNXXX_SWUM204.book Page 245 Monday, January 25, 2016 1:25 PM