Administrator Guide

Using the CLI 253
• SNMPv3 and the security information for used this protocol.
For each of these management profiles, the administrator defines the list of
hosts or subnets from which the management profiles may be used. The
management ACL capability only applies to in-band ports and may not be
configured on the out-of-band management port.
Other CLI Tools and Capabilities
The CLI has several other capabilities associated with its primary functions.
Terminal Paging
The terminal width and length for CLI displays is 79 characters and 25 lines,
respectively. The length setting is used to control the number of lines the CLI
will display before it pauses. For example, the CLI pauses at 24 lines and
prompts the user with the
-more- prompt on the 25th line. The CLI waits for
the user to press either <q> or any other key. If the user presses any key
except <q>, the CLI shows the next page. A <q> key stops the display and
returns to the CLI prompt. Use the terminal length command to change the
number of lines displayed in a page.
Boot Message
The boot message is a system message that is not user-configurable and is
displayed when the system is booting.
To start the normal booting process, select item 1 in the Boot Menu. The
following is a sample log for booting information.
Select startup option within 5 seconds, else Operational Code will start
automatically...
Operational Code Startup -- Main Menu
1 - Start Operational Code
2 - Display Boot Menu
Select (1, 2)#
active = /dev/mtd7
Extracting Operational Code from .stk file...done.
Loading Operational Code...done.
Decompressing Operational Code...done.
Scanning devshell symbols file...
47544 symbols, loading...
Done.
2CSNXXX_SWUM204.book Page 253 Monday, January 25, 2016 1:25 PM