Administrator Guide

Layer 2 Switching Commands 282
User Guidelines
To specify multiple protocols, enter the protocol parameters together on the
command line, separated by spaces. This command can only be entered once
per interface if no intervening no service-acl input command has been
entered.
Example
console(config-if-Te1/0/1)#service-acl input blockall
show service-acl interface
This command displays the status of LLPF rules configured on a particular
port or on all the ports.
Syntax
show service-acl interface { interface-id | all}
• interface-id — An Ethernet interface identifier or a port channel interface
identifier.
See Interface Naming Conventions for interface representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show service-acl interface te1/0/1
console(config-if-Te1/0/1)#show service-acl interface te1/0/1
Service-acl Interface Te1/0/1
Protocol Mode
--------------- ----------
CDP Disabled
2CSNXXX_SWUM204.book Page 282 Monday, January 25, 2016 1:25 PM