Administrator Guide

Layer 2 Switching Commands 283
VTP Disabled
DTP Disabled
UDLD Disabled
PAGP Disabled
SSTP Disabled
ALL Disabled
show access-lists interface
Use the show access-lists interface command to display interface ACLs.
Syntax
show access-lists interface interface-id {in | out} | control-plane
• interface-id — The interface identifier (Ethernet, port-channel, or VLAN).
• in — Show the ingress ACLs.
• out — Show the egress ACLs.
• control-plane — Show the control plane ACLs.
Default Configuration
No ACLs are configured by default.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Examples
console#show access-lists interface control-plane
ACL Type ACL ID Sequence Number
-------- ------------------------------- ---------------
IPv6 ip61 1000
show ip access-lists
Use the show ip access-lists command in Privileged Exec mode to display an
IP ACL and time-range parameters.
2CSNXXX_SWUM204.book Page 283 Monday, January 25, 2016 1:25 PM