Administrator Guide

Layer 2 Switching Commands 304
show mac address-table count
Use the show mac address-table count command in User Exec or Privileged
Exec mode to display the number of addresses present in the Forwarding
Database.
Syntax
show mac address-table count [vlan vlan-id | interface interface-id ]
• interface-id — Specify an interface type; valid interfaces include Ethernet ports
and port channels.
• vlan-id — Specify a valid VLAN, the range is 1 to 4093.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the addresses in the Forwarding Database:
console#show mac address-table count
Capacity: 8192
Used: 109
Static addresses: 2
Secure addresses: 1
Dynamic addresses: 97
Internal addresses: 9
show mac address-table dynamic
Use the show mac address-table command in User Exec or Privileged Exec
mode to display all dynamic entries in the bridge-forwarding database.
2CSNXXX_SWUM204.book Page 304 Monday, January 25, 2016 1:25 PM