Administrator Guide

Layer 2 Switching Commands 310
This information is shown if the static parameter is given:
This information is shown if the violation parameter is given:
Command History
Updated in 6.3.0.1 firmware.
Example
console(config)#show port-security static gi1/0/1
Number of static MAC addresses configured: 2
Static MAC address VLAN ID Sticky
------------------ ------- ------
00:01:ad:32:01 2 Yes
00:10:fe:48:19 2 No
Field Description
Dynamcally Configured
MAC Address
Dynamically locked MAC addresses.
Field Description
Statically Configured
MAC Address
Statically configured MAC addresses.
VLAN ID The VLAN identifier of the MAC address.
Sticky Indicates if the secure MAC address is sticky.
Field Description
MAC address The source MAC address of the last packet
discarded on the interface.
VLAN ID The VLAN identifier of the discarded packet, if
applicable.
2CSNXXX_SWUM204.book Page 310 Monday, January 25, 2016 1:25 PM