Administrator Guide

Layer 2 Switching Commands 320
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp
Timer................................ 30
Hold Time............................ 180
Version 2 Advertisements............. Enabled
Neighbors table last time changed.... 0 days 00:06:01
Device ID............................ QTFMPW82400020
Device ID format capability.......... Serial Number
Device ID format..................... Serial Number
show isdp entry
The show isdp entry command displays ISDP entries. If a device id specified,
then only the entry about that device is displayed.
Syntax
show isdp entry {all | deviceid }
• all — Show ISDP settings for all devices.
• deviceid — The device ID associated with a neighbor.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp entry Switch
2CSNXXX_SWUM204.book Page 320 Monday, January 25, 2016 1:25 PM