Administrator Guide

Layer 2 Switching Commands 401
Example
The following example shows output with higher than normal CPU usage due
to packets copied to the software forwarding task.
console#show process cpu
Memory Utilization Report
status bytes
------ ----------
free 1053933568
alloc 673873920
CPU Utilization:
PID Name 5 Secs 60 Secs 300 Secs
---------- ------------------- -------- -------- --------
1129 osapiTimer 0.00% 0.00% 0.01%
1133 _interrupt_thread 0.09% 0.01% 0.00%
1137 bcmCNTR.0 0.24% 0.31% 0.31%
1142 bcmRX 23.00% 27.01% 18.01%
1147 ipMapForwardingTas 32.97% 37.11% 29.92%
1155 bcmLINK.0 0.34% 0.36% 0.36%
1156 cpuUtilMonitorTask 0.09% 0.05% 0.04%
1170 nim_t 0.09% 0.08% 0.07%
1208 dot1s_timer_task 0.00% 0.00% 0.01%
1222 snoopTask 0.00% 0.00% 0.01%
1291 RMONTask 0.00% 0.02% 0.03%
1293 boxs Req 0.00% 0.01% 0.01%
------------------------------ -------- -------- --------
Total CPU Utilization 27.31% 28.97% 31.01%
show interfaces
Use the show interfaces command to list the traffic statistics for one or
multiple interfaces. If no parameter is given, all interfaces are shown.
Syntax
show interfaces [ interface-id ]
• interface-id —A physical interface id (i.e., a 1G, 10G, or 40G interface) in
standard interface format.
2CSNXXX_SWUM204.book Page 401 Monday, January 25, 2016 1:25 PM