Administrator Guide

Layer 2 Switching Commands 413
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays detailed status and configuration of the
specified interface.
console(config)#show interfaces detail gi1/0/1
Port Description Duplex Speed Neg MTU Admin Link
State State
--------- --------------------------- ------ ------- ---- ----- ----- -----
Gi1/0/1 N/A Unknown Auto 1518 Up Down
Port Description
--------- ------------------------------------------------------------------
Gi1/0/1
Flow Control: Enabled
Port: Gi1/0/1
VLAN Membership mode: Access Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status: Disabled
Protected: Disabled
Port Gi1/0/1 is member in:
VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
1 default Untagged Default
Static configuration:
2CSNXXX_SWUM204.book Page 413 Monday, January 25, 2016 1:25 PM