Administrator Guide

Layer 2 Switching Commands 414
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Port Gi1/0/1 is statically configured to:
VLAN Name Egress rule
---- --------------------------------- -----------
Forbidden VLANS:
VLAN Name
---- ---------------------------------
Port Gi1/0/1 Enabled
State: Disabled Role: Disabled
Port id: 128.1 Port Cost: 0
Port Fast: No (Configured: no ) Root Protection: No
Designated bridge Priority: 32768 Address: 001E.C9DE.C52B
Designated port id: 0.0 Designated path cost: 0
CST Regional Root: 80:00:00:1E:C9:DE:C5:2B CST Port Cost: 0
BPDU: sent 0, received
show interfaces status
Use the show interfaces status command in Privileged Exec mode to display
the status for all configured interfaces.
Syntax
show interfaces status
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
Port channels are only displayed if configured. Use the show interfaces port-
channel
command to display configured and unconfigured port channels.
Interfaces configured as stacking ports will show as detached in the output of
2CSNXXX_SWUM204.book Page 414 Monday, January 25, 2016 1:25 PM