Administrator Guide

Layer 2 Switching Commands 418
Syntax
show statistics {gigabitethernet unit/slot/port |switchport | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}
• unit/slot/port — A valid interface. See Interface Naming Conventions for
interface representation.
• switchport —Displays statistics for the entire switch.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Examples
The following example shows statistics for port Te1/0/1.
console(config-if-Te1/0/1)#show statistics te1/0/1
Total Packets Received (Octets)................ 0
Packets Received 64 Octets..................... 0
Packets Received 65-127 Octets................. 0
Packets Received 128-255 Octets................ 0
Packets Received 256-511 Octets................ 0
Packets Received 512-1023 Octets............... 0
Packets Received 1024-1518 Octets.............. 0
Packets Received > 1518 Octets................. 0
Packets RX and TX 64 Octets.................... 0
Packets RX and TX 65-127 Octets................ 0
Packets RX and TX 128-255 Octets............... 0
Packets RX and TX 256-511 Octets............... 0
Packets RX and TX 512-1023 Octets.............. 0
Packets RX and TX 1024-1518 Octets............. 0
Packets RX and TX 1519-2047 Octets............. 0
Packets RX and TX 2048-4095 Octets............. 0
Packets RX and TX 4096-9216 Octets............. 0
2CSNXXX_SWUM204.book Page 418 Monday, January 25, 2016 1:25 PM