Administrator Guide

Layer 2 Switching Commands 423
Gi1/0/4 Disable 5 Disable 5 Disable 5 Enabled
Gi1/0/5 Disable 5 Disable 5 Disable 5 Enabled
Gi1/0/6 Disable 5 Disable 5 Disable 5 Enabled
Gi1/0/7 Disable 5 Disable 5 Disable 5 Enabled
Gi1/0/8 Disable 5 Disable 5 Disable 5 Enabled
show storm-control action
Use the show storm-control action command to display the storm control
action configuration for one or all interfaces.
Syntax
show storm-control action {all | interface-id }
• all —Show the storm control action configuration for all interfaces.
•
interface-id —A physical interface on which storm control is enabled.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode and all show modes
User Guidelines
This command has no user guidelines.
Examples
console(config)#show storm-control action all
Bcast Mcast
Port Action Action
--------- ---------- ----------
Gi1/0/1 Shutdown
Gi1/0/2
Gi1/0/3
Gi1/0/4
Gi1/0/5
Gi1/0/6
2CSNXXX_SWUM204.book Page 423 Monday, January 25, 2016 1:25 PM