Administrator Guide
Layer 2 Switching Commands 438
User Guidelines
Refer to IEEE 802.1ag for an explanation of maintenance association levels.
Typically, this value is assigned by the top level network service provider.
Example
console(config-if-Gi1/0/1)# ethernet cfm mip level 7
ping ethernet cfm
Use the ping ethernet cfm command in Privileged Exec mode to generate a
loopback message (LBM) from the configured MEP.
Syntax
ping ethernet cfm {mac
mac-addr
| remote-mpid
1-8191
} {domain
domain
name
| level
0-7
} vlan
vlan-id
mpid
1-8191
[count
1-255
]
•
level
—Maintenance association level
•
mac-addr
—
The destination MAC address for which the connectivity needs to
be verified. Either MEP ID or the MAC address option can be used.
•
remote-mpid
—
The MEP ID for which connectivity is to be verified; i.e. the
destination MEP ID.
•
domain
—
Name of the maintenance domain (an alphanumeric string of up to
43 characters in length).
•
vlan-id
—
A VLAN associated with the maintenance domain. Range: 1-4093.
•
mpid
—
The MEP ID from which the loopback message needs to be
transmitted.
•
count
—
The number of LBMs to be transmitted. The default number is 1.
Default Configuration
By default, this command will transmit one loopback message with a time-out
of five seconds.
Command Mode
Privileged Exec
2CSNXXX_SWUM204.book Page 438 Monday, January 25, 2016 1:25 PM