Administrator Guide

Layer 2 Switching Commands 440
User Guidelines
This command has no user guidelines.
Example
console # traceroute ethernet cfm remote-mpid 32 level 7 vlan 11 mpid 12
show ethernet cfm errors
Use the show ethernet cfm errors command in Privileged Exec mode to
display the cfm errors.
Syntax
show ethernet cfm errors {domain domain-id | level 0-7 }
• level —Maintenance association level
•
domain —Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Configuration mode and all Configuration submodes
User Guidelines
• Level—The maintenance association level
• SVID—The service identifier
• MPID—The maintenance endpoint identifier
• DefRDICcm—A remote MEP reported the RDI bit in a CCM.
• DefMACStatus—Some remote MEP reported its Interface Status TLV as
something other then isUp.
• DefRemoteCCM—The MEP did not receive valid CCMs from at least
one of the remote MEPs
• DefErrorCCM—The MEP has received at least one invalid CCM whose
CCM interval has not yet timed out.
2CSNXXX_SWUM204.book Page 440 Monday, January 25, 2016 1:25 PM