Administrator Guide

Layer 2 Switching Commands 456
Example
console#show green-mode
Current Power Consumption (mW)................. 11545
Power Saving /Stack (%)........................ 3
Cumulative Energy Saving /Stack (W * H)........ 17
Unit Green Ethernet Features Supported
---- -----------------------------------------------------------------------
1 Energy-Detect EEE LPI-History LLDP-Cap-Exchg Pwr-Usg-Est
Interface Energy-Detect Short-Reach-Config Short-Reach EEE
Config Opr Auto Forced Opr Config
--------- --------- --------- --------- --------- ----------- --------
Gi1/0/1 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/2 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/3 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/4 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/5 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/6 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/7 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/8 Enabled Active Enabled Disabled In-Active Enabled
show green-mode eee-lpi-history interface
Use the show green-mode eee-lpi-history interface command in Privileged
Exec mode to display the interface green-mode EEE LPI history.
Syntax
show green-mode eee-lpi-history interface interface-id
Energy-detect
Config
Energy-detect Admin mode is enabled or disabled.
Energy-detect Opr Energy detect mode is currently active or inactive. The energy
detect mode may be administratively enabled, but the
operational status may be inactive.
EEE
EEE Config EEE Admin Mode is enabled or disabled.
Term Description
2CSNXXX_SWUM204.book Page 456 Monday, January 25, 2016 1:25 PM