Administrator Guide

Layer 2 Switching Commands 466
Gi1/0/12 20 60 1000 Disabled
Gi1/0/13 20 60 1000 Disabled
Gi1/0/14 20 60 1000 Disabled
show gvrp error-statistics
Use the show gvrp error-statistics command in User Exec mode to display
GVRP error statistics.
Syntax
show gvrp error-statistics [ interface-id ]
• interface-id —An Ethernet interface identifier or a port channel interface
identifier.
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration sub-modes
User Guidelines
If no interface-id parameter is given, all interfaces are shown.
Example
The following example displays GVRP error statistics information.
console>show gvrp error-statistics
GVRP error statistics:
----------------
Legend:
INVPROT: Invalid Protocol Id INVATYP: Invalid Attribute Type
INVALEN: Invalid Attribute Length INVAVAL: Invalid Attribute Value
INVEVENT: Invalid Event
Port INVPROT INVATYP INVAVAL INVALEN INVEVENT
---- ------- ------- ------- ------- --------
Gi1/0/1 0 0 0 0 0
2CSNXXX_SWUM204.book Page 466 Monday, January 25, 2016 1:25 PM