Administrator Guide

Layer 2 Switching Commands 500
clear host
Use the clear host command in Privileged Exec mode to delete entries from
the host name-to-address cache.
Syntax
clear host { name | *}
• name — Host name to be deleted from the host name-to-address cache.
(Range: 1-255 characters)
•
* — Deletes all entries in the host name-to-address cache.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
The following example deletes all entries from the host name-to-address
cache.
console#clear host *
clear ip address-conflict-detect
Use the clear ip address-conflict-detect command in Privileged Exec mode to
clear the address conflict detection status in the switch.
ip domain-name show ipv6 dhcp interface out-of-band
statistics
ip host show ipv6 interface out-of-band
2CSNXXX_SWUM204.book Page 500 Monday, January 25, 2016 1:25 PM