Administrator Guide

Layer 2 Switching Commands 544
Default configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This user guideline applies to all switch models.To see the full Multicast
address table (including static addresses) use the
show mac address-table
multicast
command.
Example
This example shows MLDv2 snooping entries
console#show ipv6 mld snooping groups
Vlan Group Type OIFs
---- ----------------------- ------- ------------------------------------
1 3333.0000.0003 Dynamic Te1/0/1,Te1/0/17
MLD SSM Entries :
-----------------
VLAN Group Reporter Filter IIF Source Address
---- ---------------- ---------------- --------- ---------- ----------------
1 ff1e:2222:2222: fe80::200:3ff:f include Te1/0/1 2001::2
2222:2222:2222: e00:b00
2222:2222
show ipv6 mld snooping mrouter
Use the show ipv6 mld snooping mrouter command to display information
on dynamically learned Multicast router interfaces.
Syntax
show ipv6 mld snooping mrouter
2CSNXXX_SWUM204.book Page 544 Monday, January 25, 2016 1:25 PM